Hello everbody,

So there is this new trend going on, where you can set the ctype of portals so they only accept a certain element. Well, if you're like me, I know how to use the console to do this, but don't always want to do that, so what if there were powered portals.

My idea is to add two elements to Powder Toy:

Powered Portal In (PWTI)

Powered Portal Out (PWTO)

When PWTI, Powered Portal In, would recieve a spark from PSCN, it would activate, and particles could enter. Then, when PWTO, Powered Portal Out, recieved a spark from PSCN, the same particles would exit. Of course, when both recieve a spark from NSCN, they would be deactivated.

These two elements would be located under the Powered Materials.

When PWTI wasn't activated, it would be a dark red color, similar to that of VOID, then when it was powered up, it would change to the color of PRTI. When PWTO wasn't activated, it would be a dark blue color, similar to that of PUMP, and when it was activated it would be the same color as PRTO.

This would also allow greener users of Powder Toy to start understanding Powered Materials. This would also allow for the use of WIFI channels to activate/deactivate portals, rather than using the large and blocky E-Wall.

Thank you for reading my post.

I would greatly appreciate feedback from all.

I know you can use E-Wall with WIFI, but it is always 4x4, this could be 1x1, and be much smaller, and it would also eliminate needing to use E-Wall in one of my saves: 911696

@jacob1, PPIP would be cool cool now, but i don't think you all are understanding my idea. i don't want to have to use blocky pipe! i just want to be able to have micro machines, and i'm sure several others want to make machines the smallest they can to implement them into other saves to improve them.