Difference between revisions of "Element:CLST"

From The Powder Toy
Jump to: navigation, search
m (added a negative sign)
m (removed "zzzz")
Line 38: Line 38:
 
}}
 
}}
  
−
Clay dust is a 'sticky' powder, whose particles tend to cling to each other. Stickiness becomes stronger with lower temperatures, turning clay dust almost into a solid below -78°C.
+
CLST produces {{Material | PSTE}} when in contact with water. CLST particles are naturally 'sticky' and tend to cling to each other, when cold. Particles literally freeze at about -70°C (I.E. turn to a pseudo-solid state). It melts at about 984°C
−
Because of its clinging abilities, clay dust tends to stack on top of itself like [[Element:CNCT|concrete]].
 
  
−
The texture effect comes from the fact that the color of a clay dust particle is based on its .tmp value, which is random. The same effect is used in [[Element:QRTZ|quartz]] and [[Element:PQRT|powdered quartz]].
+
Because of it's clinging abilities, CLST tends to stack on top of itself, almost like concrete.
  
−
== Creation ==
+
CLST will make {{Material | TNT}} when mixed with {{Material | NITR}}.
 +
CLST will make {{Material | CRMC}} when mixed with {{Material | QRTZ}} or {{Material | PQRT}}
 +
CLST can be created by creating negative pressure near {{Material | CRMC}}
  
−
[[Element:CRMC|Ceramic]] will break into clay dust below -30.0 pressure:
+
The texture effect comes from the fact that the color of a CLST particle is based on its .tmp value, which is random. The same effect is used in {{Material | QRTZ}} and {{Material | PQRT}}.
  
−
{{MaterialBtn|CRMC}} → {{MaterialBtn|CLST}}
+
{{Languages}}
−
 
 
−
[[Element:GEL|Gel]] and [[Element:SPNG|sponge]] absorb water from [[Element:PSTE|paste]] and turn it into clay dust:
 
−
 
 
−
{{MaterialBtn|PSTE}} + {{MaterialBtn|GEL}} → {{MaterialBtn|CLST}} + {{MaterialBtn|GEL}}
 
−
 
 
−
{{MaterialBtn|PSTE}} + {{MaterialBtn|SPNG}} → {{MaterialBtn|CLST}} + {{MaterialBtn|SPNG}}
 
−
 
 
−
Molten [[Element:SLCN|silicon powder]] with [[Element:OXYG|oxygen]] may randomly produce molten clay dust with 1/3 probability if the temperature of molten silicon is below {{Temperature|t=7719.45}}:
 
−
 
 
−
3×{{MaterialBtn|SLCN}} + 3×{{MaterialBtn|OXYG}} → {{MaterialBtn|SAND}} + {{MaterialBtn|STNE}} + {{MaterialBtn|CLST}}
 
−
 
 
−
== Reactions ==
 
−
 
 
−
Clay dust with water gives [[Element:PSTS|solid paste]]:
 
−
 
 
−
{{MaterialBtn|WATR}} + {{MaterialBtn|CLST}} → {{MaterialBtn|PSTS}}
 
−
 
 
−
Molten quartz and molten clay dust combine into ceramic:
 
−
 
 
−
{{MaterialBtn|QRTZ}} + {{MaterialBtn|CLST}} → 2×{{MaterialBtn|CRMC}}
 
−
 
 
−
Clay dust mixed with [[Element:NITR|nitroglycerin]] produces [[Element:TNT|TNT]]:
 
−
 
 
−
{{MaterialBtn|NITR}} + {{MaterialBtn|CLST}} → {{MaterialBtn|TNT}}
 
−
 
 
−
{{Languages|Element:CLST}}
 

Revision as of 02:35, 16 August 2023

CLST.png Clay dust
Properties
Section Powders
Spawn temperature 22°C
Heat Conductivity 28%
Relative weight 55
Gravity 0.2
Acid dissolve rate 0.2%
Flammability 0
State Powder
Transitions
High temperature LAVA.png above 982.85°C
Source code


CLST produces PSTE when in contact with water. CLST particles are naturally 'sticky' and tend to cling to each other, when cold. Particles literally freeze at about -70°C (I.E. turn to a pseudo-solid state). It melts at about 984°C

Because of it's clinging abilities, CLST tends to stack on top of itself, almost like concrete.

CLST will make TNT when mixed with NITR. CLST will make CRMC when mixed with QRTZ or PQRT CLST can be created by creating negative pressure near CRMC

The texture effect comes from the fact that the color of a CLST particle is based on its .tmp value, which is random. The same effect is used in QRTZ and PQRT.

Language: [[::Element:CLST|English]]
Retrieved from "https://powdertoy.co.uk/Wiki/index.php?title=Element:CLST&oldid=8889"