Difference between revisions of "Element:WIFI"

From The Powder Toy
Jump to: navigation, search
(Improved the "Usage" section. Much more work needs to be done.)
m (Reverted edits by bodester (talk) to last revision by LBPHacker)
 
(14 intermediate revisions by 7 users not shown)
Line 6: Line 6:
 
| identifier = DEFAULT_PT_WIFI
 
| identifier = DEFAULT_PT_WIFI
 
| name = WIFI
 
| name = WIFI
−
| description = Wireless transmitter, transfers spark to any other wifi on the same temperature channel.
+
| description = Wireless transmitter, transfers spark to any other WIFI on the same temperature channel.
 
| colour = 40A060
 
| colour = 40A060
 
| menusection = SC_ELEC
 
| menusection = SC_ELEC
Line 37: Line 37:
 
| highpressuretransition = BRMT
 
| highpressuretransition = BRMT
 
}}
 
}}
−
 
−
== Creation ==
 
−
Only with brush, cannot be created with reactions.
 
  
 
== Usage ==
 
== Usage ==
−
There are 101 channels available to WiFi. A WiFi particle's channel is determined by its temperature. The first channel ranges from -273.15C to -200C, and after each channel is 100C apart, so that the next channel is -200C to -100C, and so on. The channel is shown in .tmp, to make it easier to see.
+
There are 101 channels available to WiFi. A WiFi particle's channel is determined by its temperature. The first channel ranges from 0K to 73.15K (-273.15°C to -200°C), and after that, each channel is 100° apart. For example, the next channel would be from 73.15K to 173.15K (-200°C to -100°C), and so on.  
−
 
 
−
When a particle of WiFi is sparked by any material except [[NSCN]], all WIFIs on that channel will output [[SPRK]] to [[PSCN]], [[NSCN]], and [[INWR]].
 
−
 
 
−
Wifi does not conduct heat, but its temp can be changed by PROT.
 
−
 
 
−
== How to use, with pictures ==
 
−
 
 
−
Wifi is actually very easy to use.
 
−
 
 
−
Wifi element can accept spark from any metal (Except NSCN), but can only give spark back to NSCN, PSCN and INWR. As you can see in this image, the spark is going into WIFI at the end..
 
−
 
 
−
[[File:81745231.gif]]
 
−
 
 
−
...And then back out the other WIFI particle, which is surrounded by an excessive amount of NSCN just for example.
 
−
 
 
−
Different particles of WIFI have a preset frequency, and can send sparks over ANY distance without any lag at all. There are 99 frequencies, all of which are 100 degrees apart, a link to all others in the same frequency will be shown when mouse over one of them. They behave like insulation with heat, and must manually be heated in order to change the frequency of the element, which visibly changes color to reflect this. For example here, the WIFI on the outside is -270 temp, while the inside is 700 temp. Particles of WIFI do not exchange heat with any other particles.
 
−
 
 
−
It should be noted that wifi channels start with -273.15 to -200.01 being the first channel, but from there they go by hundreds (-200 to -100.01 being the next)
 
−
 
 
−
[[File:Wificolordifference.png]]
 
−
 
 
−
As a result of this mechanic, any WIFI particles that get sparked will all release a spark if they're nearly the same temperature. If you have 20 WIFI particles and only one of them gets a spark, if all the WIFI particles are nearly the same temperature, then they will all release a spark at the same moment. In this example, I only added one particle of WIFI, but it received a spark too. You can't easily see, but there's one particle of NSCN touching it that allows it to give off spark.
 
  
−
[[File:97958185.gif]]
+
The easiest way to set the channel of WiFi is to use PROP. Simply change the WiFi's temperature to the channel minus 3 multiplied by 100, plus 50. For example, to get channel 47, you would set the temp to 4450 (the 50 is to make sure to not have it on the border between channels as tpt may subtract a bit from the temperature when saving & loading it). The actual channel is shown in the .tmp value in order to make it easier to see.
  
−
Lastly, WIFI particles of different frequencies will not give spark to one another. You may use this to make sure that a spark to one wifi will not spark all of them by accident, and with 99 channels you can massively change the way electronics are designed. In this example, I have the wire set up to infinite loop.
+
When a particle of WiFi is sparked by any material ''except'' {{Material|NSCN}}, all WIFIs on that channel will output {{Material|SPRK}} to any {{Material|PSCN}}, {{Material|NSCN}} and {{Material|INWR}} that are touching the WIFI particle.
  
−
[[File:82206928.gif]]
+
==Reactions==
 +
WiFi does not conduct heat, but its temp (and thus channel) can be changed by {{Material|PROT}}.  
  
−
== Examples ==
+
{{Material|EMP}} will randomly change the temperature of WIFI when it is active.
  
−
{|border="1" cellpadding="5" cellspacing="0"
+
When the pressure is above 15, WiFi will break into {{Material|BRMT}}, which will immediately melt if the channel of the original WIFI particle was over 10 (above 1000°C).
−
|-
 
−
| A Tic-Tac-Toe game using WiFi. First result when searching "wifi" from Powder Toy.
 
−
| {{ save | id=105313 }}
 
−
|-
 
−
| The device in this save reads incoming WiFi signals and tells the channel they came from.
 
−
| {{ save | id=684780 }}
 
−
|}
 
  
 
{{Languages}}
 
{{Languages}}

Latest revision as of 16:39, 20 June 2024

WIFI.png WiFi
81745231.gif
Wireless transmitter, transfers spark to any other WIFI on the same temperature channel.
Properties
Section Electronics
Spawn temperature 22°C
Heat Conductivity 0%
Relative weight 100
Gravity 0
Acid dissolve rate 0.2%
Flammability 0
State Solid
Transitions
High pressure BRMT.png above 15 pressure
Source code


Usage

There are 101 channels available to WiFi. A WiFi particle's channel is determined by its temperature. The first channel ranges from 0K to 73.15K (-273.15°C to -200°C), and after that, each channel is 100° apart. For example, the next channel would be from 73.15K to 173.15K (-200°C to -100°C), and so on.

The easiest way to set the channel of WiFi is to use PROP. Simply change the WiFi's temperature to the channel minus 3 multiplied by 100, plus 50. For example, to get channel 47, you would set the temp to 4450 (the 50 is to make sure to not have it on the border between channels as tpt may subtract a bit from the temperature when saving & loading it). The actual channel is shown in the .tmp value in order to make it easier to see.

When a particle of WiFi is sparked by any material except NSCN, all WIFIs on that channel will output SPRK to any PSCN, NSCN and INWR that are touching the WIFI particle.

Reactions

WiFi does not conduct heat, but its temp (and thus channel) can be changed by PROT.

EMP will randomly change the temperature of WIFI when it is active.

When the pressure is above 15, WiFi will break into BRMT, which will immediately melt if the channel of the original WIFI particle was over 10 (above 1000°C).

Language: [[::Element:WIFI|English]]
Retrieved from "https://powdertoy.co.uk/Wiki/index.php?title=Element:WIFI&oldid=9284"