Difference between revisions of "Element:ETRD"
m (Moo category) |
(Infobox, copy description from Elements:Electronics) |
||
| Line 1: | Line 1: | ||
{{ infobox Element | {{ infobox Element | ||
| − | | icon = | + | | icon = ETRD.png |
| − | | longname = | + | | longname = Electrode |
| − | | image = | + | | image = |
| − | | | + | | identifier = DEFAULT_PT_ETRD |
| − | | description = | + | | name = ETRD |
| − | | explosive = | + | | description = Creates a surface that allows Plasma arcs. (Use sparingly) |
| − | | flammable = | + | | colour = 404040 |
| − | | gravity = | + | | menusection = SC_ELEC |
| − | | heatconduct = | + | | menuvisible = 1 |
| − | | meltable = | + | | advection = 0 |
| − | | weight = | + | | airdrag = 0 |
| + | | airloss = 0.9 | ||
| + | | loss = 0 | ||
| + | | collision = 0 | ||
| + | | diffusion = 0 | ||
| + | | explosive = 0 | ||
| + | | falldown = 0 | ||
| + | | flammable = 0 | ||
| + | | gravity = 0 | ||
| + | | hardness = 1 | ||
| + | | heatconduct = 251 | ||
| + | | hotair = 0 | ||
| + | | meltable = 0 | ||
| + | | state = ST_NONE | ||
| + | | temperature = 295.15 | ||
| + | | weight = 100 | ||
| + | | properties = TYPE_SOLID PROP_CONDUCTS PROP_LIFE_DEC | ||
| + | | lowtemperature = | ||
| + | | lowtemperaturetransition = | ||
| + | | hightemperature = | ||
| + | | hightemperaturetransition = | ||
| + | | lowpressure = | ||
| + | | lowpressuretransition = | ||
| + | | highpressure = | ||
| + | | highpressuretransition = | ||
}} | }} | ||
| − | + | When energized finds the nearest electrode and creates a line of plasma between them and transfers the charge. Caution: Use literally 1 pixel of it per electrode, not entire blocks. Otherwise this will create an awful lot of plasma which is usually very laggy. It will keep looping if you use more than 2. Electrode will not fire to an adjacent electrode if INSL is directly in the center of the two. Walls will not affect the plasma or transfer. | |
| − | |||
| − | |||
| − | + | {{Languages}} | |
| − | |||
| − | |||
| − | + | [[Category:Work in progress]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | [[Category: | ||
Revision as of 13:50, 6 October 2014
| Properties | |
|---|---|
| Section | Electronics |
| Spawn temperature | 22°C |
| Heat Conductivity | 100% |
| Relative weight | 100 |
| Gravity | 0 |
| Acid dissolve rate | 0.1% |
| Flammability | 0 |
| State | Solid |
| Misc properties | |
| Conducts electricity (SPRK) | |
| Source code | |
When energized finds the nearest electrode and creates a line of plasma between them and transfers the charge. Caution: Use literally 1 pixel of it per electrode, not entire blocks. Otherwise this will create an awful lot of plasma which is usually very laggy. It will keep looping if you use more than 2. Electrode will not fire to an adjacent electrode if INSL is directly in the center of the two. Walls will not affect the plasma or transfer.
| Language: | [[::Element:ETRD|English]] |
|---|
