Difference between revisions of "Element:SPRK"
ArolaunTech (talk | contribs) m |
m (removed ptct and ntct from cooling as it doesnt matter if they are sparked instead they cool all the time when above a certain threshhold instead.) |
||
| Line 67: | Line 67: | ||
{{MaterialBtn|INST}}, {{MaterialBtn|RBDM}}, {{MaterialBtn|LRBD}}, {{MaterialBtn|WATR}}, {{MaterialBtn|PTNM}}, {{MaterialBtn|GOLD}}, {{MaterialBtn|TTAN}}, {{MaterialBtn|SLCN}}, and {{MaterialBtn|BREL}} do not heat up when conducting. | {{MaterialBtn|INST}}, {{MaterialBtn|RBDM}}, {{MaterialBtn|LRBD}}, {{MaterialBtn|WATR}}, {{MaterialBtn|PTNM}}, {{MaterialBtn|GOLD}}, {{MaterialBtn|TTAN}}, {{MaterialBtn|SLCN}}, and {{MaterialBtn|BREL}} do not heat up when conducting. | ||
| − | Some conductors will actually cool down when heated above a threshold and sparked. ETRD cools to its temperature range, INWR and WATR cool to 22°C, | + | Some conductors will actually cool down when heated above a threshold and sparked. ETRD cools to its temperature range, INWR and WATR cool to 22°C, {{MaterialBtn|TESC}} is strange in that it, in small amounts, it actually cools itself down to near absolute zero, but in large enough amounts can heat itself with {{MaterialBtn|LIGH}} to max temperature. |
== Uses == | == Uses == | ||
A must have for all electronics. Many different uses. | A must have for all electronics. Many different uses. | ||
Revision as of 09:57, 4 April 2022
| Language: | English |
|---|
 Electricity. The basis of all electronics in TPT, travels along wires and other conductive elements. | |
| Properties | |
|---|---|
| Section | Electronics |
| Spawn temperature | 22°C |
| Heat Conductivity | 100% |
| Relative weight | 100 |
| Gravity | 0 |
| Acid dissolve rate | 0.1% |
| Flammability | 0 |
| State | Solid |
| Misc properties | |
| Source code | |
Creation
SPRK is created when:
is placed within 2 pixels of any conductor except 
, 
, 
, or 
.
, non-brown 
, 
, or 
hits a conductor.
hits a layer of 
with 
behind it.
, 
, 
, 
, 
or 
are activated
with ctype SPRK is next to a conductor
or 
has a life between 1 and 300
with a life of 0 is next to 
is next to 
and 
Reactions
Creates a current of electricity and is used to turn powered materials on or off.
SPRK cannot be placed alone, you need to put it on a conductive material. SPRK can be blocked by 
in most cases. As long as there is an INSL between the two conductors, it will not go through. Some special elements won't be activated through INSL either, although some will anyway (like 
). Some elements have special rules on which other conductors it can conduct to, see each element for help.
Conductivity
SPRK can travel through most conductors every 8 frames, with 4 frames of activity and then 4 frames of rest before a conductor will receive any more SPRK. SPRK travels twice as fast through 
, , or 
as it does through most other conductors and one quarter as fast in 
. The travel time through is the same for any length.
Resistance
SPRK produces heat when traveling through most conductors. 
produces the most heat this way, getting up to 3323.25°C. 
, 
, and 
reach 390.68°C. Unless heated, 
will rise until just under 400°C before dropping to reach around 391°C. METL, BMTL, and BRMT will turn maroon when heated to these temperatures. 
reaches 35.82°C, expanding if not contained. 
will hover between around 31-41°C unless it produces plasma. and jump from 25.20-48.27°C. heats to exactly 22°C.
, 
, 
, , , , 
, , and 
do not heat up when conducting.
Some conductors will actually cool down when heated above a threshold and sparked. ETRD cools to its temperature range, INWR and WATR cool to 22°C, 
is strange in that it, in small amounts, it actually cools itself down to near absolute zero, but in large enough amounts can heat itself with to max temperature.
Uses
A must have for all electronics. Many different uses.
