Difference between revisions of "Element:WATR"
(Update infobox, copy description from Elements:Liquids) |
|||
Line 4: | Line 4: | ||
| image = [[File:WaterSticky.gif]] | | image = [[File:WaterSticky.gif]] | ||
− | | advection = 0. | + | | identifier = DEFAULT_PT_WATR |
− | | airdrag = 0. | + | | name = WATR |
+ | | description = Conducts electricity, freezes, and extinguishes fires. | ||
+ | | colour = 2030D0 | ||
+ | | menusection = SC_LIQUID | ||
+ | | menuvisible = 1 | ||
+ | | advection = 0.6 | ||
+ | | airdrag = 0.01 | ||
| airloss = 0.98 | | airloss = 0.98 | ||
− | | | + | | loss = 0.95 |
− | | | + | | collision = 0 |
− | + | | diffusion = 0 | |
− | | diffusion = | ||
| explosive = 0 | | explosive = 0 | ||
| falldown = 2 | | falldown = 2 | ||
| flammable = 0 | | flammable = 0 | ||
− | | gravity = 0. | + | | gravity = 0.1 |
| hardness = 20 | | hardness = 20 | ||
| heatconduct = 29 | | heatconduct = 29 | ||
− | + | | hotair = 0 | |
− | |||
− | |||
− | |||
− | | hotair = 0 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| meltable = 0 | | meltable = 0 | ||
− | |||
− | |||
| state = ST_LIQUID | | state = ST_LIQUID | ||
| temperature = 293.15 | | temperature = 293.15 | ||
| weight = 30 | | weight = 30 | ||
+ | | properties = TYPE_LIQUID PROP_CONDUCTS PROP_NEUTPASS PROP_LIFE_DEC | ||
+ | | lowtemperature = 273.15 | ||
+ | | lowtemperaturetransition = ICE | ||
+ | | hightemperature = 373 | ||
+ | | hightemperaturetransition = WTRV | ||
+ | | lowpressure = | ||
+ | | lowpressuretransition = | ||
+ | | highpressure = | ||
+ | | highpressuretransition = | ||
}} | }} | ||
− | + | WATR at temp of T degrees C, experiencing P pressure, will turn into WTRV, as follows: T ⩾ 99.86 + 2P . | |
+ | WATR experiencing any pressure P will turn into ICE or SNOW when WATR's temp T is ⩽ -0.01 degrees C, into ICE if P < 0.8, or SNOW if P ⩾ 0.8 . | ||
+ | Product of distilled water (DSTW) and most powders and liquids, also conducts but at a slow pace, with a longer period of time before it can conduct again. | ||
− | + | WATR will set off [[Element:RBDM|RBDM]] and [[Element:LRBD|LRBD]] when they touch, and put out [[Element:FIRE|FIRE]]. It freezes into [[Element:ICE|ICE]] and evaporates into [[Element:WTRV|steam]]. These state changes are affected by the surrounding pressure. | |
Revision as of 11:48, 6 October 2014
Conducts electricity, freezes, and extinguishes fires. | |
Properties | |
---|---|
Section | Liquids |
Spawn temperature | 20°C |
Heat Conductivity | 11.6% |
Relative weight | 30 |
Gravity | 0.1 |
Acid dissolve rate | 2% |
Flammability | 0 |
State | Liquid |
Transitions | |
Low temperature | below 0°C |
High temperature | above 99.85°C |
Misc properties | |
Conducts electricity (SPRK) | |
Allows neutrons to pass through | |
Source code |
WATR at temp of T degrees C, experiencing P pressure, will turn into WTRV, as follows: T ⩾ 99.86 + 2P .
WATR experiencing any pressure P will turn into ICE or SNOW when WATR's temp T is ⩽ -0.01 degrees C, into ICE if P < 0.8, or SNOW if P ⩾ 0.8 .
Product of distilled water (DSTW) and most powders and liquids, also conducts but at a slow pace, with a longer period of time before it can conduct again.
WATR will set off RBDM and LRBD when they touch, and put out FIRE. It freezes into ICE and evaporates into steam. These state changes are affected by the surrounding pressure.
Language: | [[::Element:WATR|English]] |
---|