RBMK Mod.2 by stuka

stuka

57 / 2

15th Jun 2016

13th Sep 2017

Work in progress...

rbmk basic example chernobyl realistic reactor destroyable

Comments

• 

  YeetyMcDeet 13th August
  is there anyway to shut this thing down?
• 

  Thatreactordude 27th July
  this is an RBMKP-2400 because of the vertical steam drums
• 

  Thatreactordude 5th Sep 2023
  Oh, and I've attempted to add auto-A3-5, if the unit goes over 950c. But right now it's interfering with the rod controls themselves. It's still in the works.
• 

  Thatreactordude 5th Sep 2023
  @Kyru I'll try, but it's not very good, lol. I'm in the middle of revamping it, with added condenser controls. More will be added soon. It's still an unfinished (but active) project, so I'll hold on publishing it for now.
• 

  Kyru 14th Apr 2023
  thatreactordude could you publish your "unfinished" project to work at the reactor i will upgrade it on my own
• 

  Thatreactordude 27th Nov 2022
  Test Log 4: Reactor is entirely unable to perform stable activation at full power, until then, caution is advised.
• 

  Thatreactordude 25th Nov 2022
  Test Log 3: Reactor sheds and/or burns insulation around turbogenerator inlets during high power uses, it is preferred to replace aforementioned insulation layers before each high power use during offtime. Caution is advised. Shut down every 2 to 3 hours during extremely high power uses, or as soon as damage is seen.
• 

  Thatreactordude 25th Nov 2022
  Test Log 2: Reaktor Bolshoy Moschnosty Kanally design is inherently unstable, specifically the condesners, at medium to high to full power. Caution is advised going over 63% power.
• 

  Thatreactordude 25th Nov 2022
  Test Log 1: Reactor has horrible stability on medium to high power even with 'half and half' selected in the core panel. Caution is advised, less coolant rods must be selected at full power in order to stabilize thermal power.
• 

  Thatreactordude 5th Sep 2022
  im delaying this project until further notice