Dual Loop Pressurized Water Reactor by dornog70
A Uranium Fueled 2 Loop Pressurized Water Reactor with 3 buildings that simulates all 3 loops somewhat realistically, along with auxilary and safety equipment. Ideal core temperature band 300-370C. Best viewed in fire display.
energy
uranium
pwrs
water
power
reactor
pressurized
uran
nuclear
realistic
Comments
-
dornog70 28th Nov 2025
unfortunately, due to portals filling the CLAs will initially start at 30-50% -
dornog70 28th Nov 2025ECCS has been mostly revamped. The plant is now able to mitigate a somewhat large break LOCA and inject water into the RCS quickly.
-
Oyne31 27th Nov 2025
mkai740361: Updating a save re-dates it -
mkai740361 26th Nov 2025
how is this already so viewed? its ben less than 20 minutes. -
dornog70 26th Nov 2025you can think of it as like standby cooling, you should be using the steam generators and the RHR to cooldown the reactor core when shutting down.
-
dornog70 26th Nov 2025however if your heat exchangers clog and you still desire to continue using it, you just need to remove the salt from them and wait for it to cool down
-
dornog70 26th Nov 2025its not intended to be used while the reactor is running and hot
-
dornog70 26th Nov 2025RHR is to be used for when the reactor is shutdown and like not at 350C or however high your operating it at. I would start it at around 100-250C, otherwise the cooling water will boil and clog the heat exchanger as you described.
-
hm 26th Nov 2025
is it normal for RHR to effectively permanently fail if used at high temps? because you used saltwater when it gets too hot it boils blocking the RHR with salt -
dornog70 26th Nov 2025np, lmk what you would like to see and ill prob add it. next to be done is better and possibly more redundant ECCS