dornog70

118 / 7

6th February

5:45:20

A Uranium Fueled 2 Loop Pressurized Water Reactor with 3 buildings that simulates all 3 loops somewhat realistically, along with auxilary and safety equipment. Ideal core temperature band 300-370C. Best viewed in fire display.

realistic nuclear uran pressurized reactor power water pwrs uranium

Comments

TPT_Idiot 9th December

what. the. ####
Thereactorguy2054v2 9th December

"over complicated" taken to a new level
dornog70 8th December

i guess while im talking; I also added protection to the RHR a while back which automatically isolates it on exceeding a certain temperature. note this when shutting down, if it occurs wait a minute or so for the heat exchangers to cool down and restart shutdown cooling
dornog70 8th December

steam from bypass line will always be hotter than steam from the heater drains/turbine exhaust
dornog70 8th December

if your MSIVs isolate due to the condenser overheating, make sure your not using the bypass for too long. let the condenser heat sink cool down, you can use the condenser makeup to assist with this. after that perform previous steps to open MSIVs and restore main condenser as a heat sink
dornog70 8th December

MSIVs will also automatically isolate upon high main condenser temperature
dornog70 8th December

verify no present LOCA signals>hold ECCS logic reset push button (next to blue ECCS actuation button)>under containment isolation panel, hold OPEN (O) on MSIVs
jakegrant0902 8th December

ok question how do i disable MSIV activation after turning it on
dornog70 6th December

I might reduce the total gel inventory to prevent total flooding of the RCS during ECCS injection
dornog70 6th December

disregard this if there is a primary system break, in a LOCA the flow of coolant rushing out and emergency coolant rushing in cools the reactor already.

The Powder Toy

Dual Loop Pressurized Water Reactor by dornog70

Comments