Dual Loop Pressurized Water Reactor by dornog70
A Uranium Fueled 2 Loop Pressurized Water Reactor with 3 buildings that simulates all 3 loops somewhat realistically, along with auxilary and safety equipment. Ideal core temperature band 300-370C. Best viewed in fire display.
energy
uranium
pwrs
water
power
reactor
pressurized
uran
nuclear
realistic
Comments
-
dornog70 20th Dec 2025
the reactor will scram if it gets too hot (~376C), if it does you will need to reset the scram relay and stop AFW. orm you can just do control z -
dornog70 20th Dec 2025disable RHR, withdraw control rods fully then maintain ~350-360C as it heats up. at 200C the steam generators will start boiling, when they do open MSIVs. verify MSR and bypass valves are opened. wait for turbine to heat up to atleast 100C, then open turbine valve and close bypass valve.
-
ca 20th Dec 2025
how do u stard it -
pickle4L17 20th Dec 2025
Auto would be my best friend -
dornog70 20th Dec 2025my final thing i want to add is autocontrol
-
dornog70 20th Dec 2025ill probably add temperature sensors around the containment and maybe a coolant sensor in the reactor
-
dornog70 20th Dec 2025i made it so you are able to bypass the scram relay similiary to the ECCS relay by holding down the reset button
-
dornog70 18th Dec 2025new logic: if reactor temperature 150C+ AND a LOCA signal is present THEN CLA automatically initiates
-
dornog70 17th Dec 2025by the way, you can hold down the reset button for the ECCS logic and you can override all the signals, using this you can restart the ventilation and use it as a containment vent
-
dornog70 17th Dec 2025I didnt mention this but there are now metal paths between the reactor building and auxiliary building (along with pipe penetrations) in the containment that allow air (pressure) to flow