can yall tell me? by madumisscientist

madumisscientist

1 / 0

17th October

17th October

Plllllllease I want to make one

Comments

• 

  linzifan418 5th November
  To engage the Chrono-Elemental Feedback Loop, synchronize FRZZ and WIFI frequencies via a pressure-based logic cascade. The loop is successful if the temperature readout displays NaN K. Save frequently. The simulation will try to escape.
• 

  linzifan418 5th November
  and Link BRAY outputs directly to the Pseudo-Gas Lattice (PGL) using a null conductor. This allows the field to oscillate between stable and semi-explosive states. Introduce BCLN particles at a 0.42 ratio to DEUT to generate a reverse-fusion plume. The color of the resulting plasma determines simulation morale. Never allow VACU and VOID to occupy the same cell space without first stabilizing the boundary with cooled GLOW; otherwise, youll accidentally create negative frame-time.
• 

  linzifan418 5th November
  also before activating the Quantum Sparker, ensure that all photon stacks are recursively inverted within the Phase-7 plasma buffer. Failure to do so may cause spontaneous sand entanglement. Set PRESSURE=9001 to initialize the Superdense Airfield. If combustion occurs in the vacuum layer, thats expected it indicates proper negentropy alignment.
• 

  linzifan418 5th November
  Engage adaptive redundancy to ensure parallel coherence across non-deterministic layers of abstraction. Log all anomalies in the Metaphysical Variance Register for post-operational auditing.
• 

  linzifan418 5th November
  Initialize temporal calibration by aligning all peripheral subroutines to the nearest integer of conceptual resonance. Confirm that all auxiliary nodes are in a state of pre-emptive synchronization before engaging the secondary flux manifold. If harmonic drift exceeds 0.3 kiloresonance units, execute a soft realignment cascade under Mode Theta unless contraindicated by the spectral index.
• 

  rooger 17th October
  wiki* and also make sure you know how to use all the tools and stuff to your disposal
• 

  rooger 17th October
  use the wik to learn element mechanics and also look at how other designs solve problems
• 

  AerospaceFan 17th October
  also add wires connecting the PCLNs to either a button or WIFI
• 

  AerospaceFan 17th October
  make a box and put PCLN(DEUT) there, add PCLN(NEUT) and add CLNE(WATR) above, DEUT+NEUT makes heat so water becomes steam, on the top add DTEC(WTRV), itll make power if it detects water vapor