Plead's mod

  • plead-for-destruction
    28th Jun 2012 Member 3 Permalink
    This is an up and coming mod with no specific genre and the only aim is to make a great mod? :P
    i need more element suggestions, but please nothing too radical!

    Key


    Red = not started
    Orange = Started - not finished
    Green = Finished
    Blue = Finished but without some features

    Current elements




    ElementDescription
    IRASIRAS, Irradiated Solution, a highly radioactive liquid that releases extremely hot flame and radiation
    CSBNHottest flame of any chemical

    Pending elements




    ElementDescription
    **
    **



    Element status


    IRAS 5%
    CSBN 0%
  • R3APER
    28th Jun 2012 Member 0 Permalink
    I'm sending the specifics of IRAS.
  • boxmein
    28th Jun 2012 Former Staff 0 Permalink
    @plead-for-destruction (View Post)
    Lemme make a table for you.
    ElementDescription
    IRASReleases radiation and heat when it burns
  • plead-for-destruction
    28th Jun 2012 Member 0 Permalink
    @boxmein (View Post)
    but but but.... it worked, then i added the second part and it randomly failed?! D:
  • R3APER
    28th Jun 2012 Member 0 Permalink
    So their idea of this liquid is to act as a slow burning type of gas, that releases moderately high temperatures in ambient heat, and the average temperature of each fire particle should be about 2,000 degrees (Celsius). Is it measured in Celsius or fehrenheit? Anyways that is the temperature of the fire itself. The other product that is given off will be neutrons. Not a lot shall be released while burning, but enough to make it noticeable. The liquid will allow neutrons to pass through it, like neutrons in water, but nothing will happen when it passes through, except the IRAS may begin to light up in the path that the neutrons take through it. Almost like when neutrons go through regular water, the path the neutrons go through turns it into distilled water. Now imagine that same visible path being illuminated by these neutrons. That would be the desired glowing effect. As for the color, I was thinking a dark oil blotchy green color, but there may be better colors out there for a material like this. I think when the IRAS is burned, it needs to be a dark greenish hue of flames and assorted smoke. The neutrons will stay their original color. The IRAS will require temperatures in excess of 1,000° to ignite, making it a prime fuel for heavy engines. If water is mixed with IRAS, it has a goo chance of turning into Deut. This will be another key reaction. I'm thinking there should be some more reactions with this but I'm not sure. Here is a list of possible reactions.
    WATER + IRAS = DEUT.
    THRM +IRAS = COAL.
    GAS +IRAS = CAUS.
    VINE/PLNT + IRAS = GOO.
    CFLM +IRAS = Compression of IRAS into OIL/DIESEL/NITR and maybe a few other liquids.
  • jacob1
    28th Jun 2012 Developer 0 Permalink
    I was also planning on doing IRAS, but you can try it too. I was going to start it next week, after that i'll be gone 10 days, so maybe you should do it first/instead. My summer has been way busier than I expected, I don't even know how much time i'll have next week before I leave.

    @R3APER (View Post)
    Did you just add those reactions? I don't remember seeing them before.
  • R3APER
    28th Jun 2012 Member 0 Permalink
    @jacob1 (View Post)
    I was just finishing up a big letter to you describing how I was going to have Plead-for-destruction do the IRAS instead, because I know you are far busier with more important stuff. Sorry to tell you late, but it gives him a challenge to work on and it doesn't waste time on your part. I didn't know you would be really busy, but this sort of works out. Thanks for understanding. And by the way, have a great summer, wherever your going.

    Yes they are new. Plus I sent you a Convo that I bet you have already seen by the time you click on this thread.
  • jacob1
    28th Jun 2012 Developer 0 Permalink
    @R3APER (View Post)
    Ok, well then this works out perfectly. When I get back I shouldn't be busy on weekdays for the rest of the summer (I'm always busy/somewhere with no internet on weekends), but by then this should be done. Hopefully IRAS turns out good enough to get put into the official version.
  • R3APER
    28th Jun 2012 Member 0 Permalink
    @jacob1 (View Post)
    That does work out pretty good.
  • plead-for-destruction
    29th Jun 2012 Member 0 Permalink
    well, i have been waiting for this moment for a long time! its time to get coding :D