I built a adjustable Amplifier which allows you to amplify a Input in stages from 0 to 10x amplification.

It already works really fine but in permanent Spark Mode the Capacitor only works from 0 to 7x amplification...

I have to improve that anyhow.

You can set your output amplification level and give input. After the Chip has done its job you can see the result in a Digital counter (its just for Presentation).

The reason why I post this is, cause I really like to see your creations with it!

It could be a very useful microchip.

So please use it or modify it if you want and show me your results.

It also would be really nice if you give credit.

The reason for placing the resistor in Single Spark Mode and the Capacitor in perm. Sparke Mode is, the AmpChip will send wrong outputs if the input has a high frequency.

Thank you!

Some Ideas:

Connect the output of a ATR_24 with a Input of a second ATR_24. If you set the first ATR on 5 and the second ATR on 2 the display will show 10... A simple Multiplikator!

More soon...