CNVR- A new element

  • Fusionftw
    17th Jan 2018 Member 1 Permalink

    Color: rgb(31, 53, 68)

    Tempature increases the speed (negative to the left, positive to the right).

    It moves powders and liquids.

    It would be in the Force Creating Section.

    The tooltip would be "Conveyor, moves things depending on tempature.

    It does not move solids. 

    It does not melt.

    It would be turned on with pscn and turned off with nscn (Possibly).

    It would not break under pressure.

    It can move particles up and down as well.

     

     

    Edited once by Fusionftw. Last: 18th Jan 2018
  • Breaker4life
    17th Jan 2018 Member 0 Permalink

    @Fusionftw (View Post)

     Need a lot more information than this. Interesting idea, but to catch more attention, you need a LOT more information and uses. 

  • randalserrano
    18th Jan 2018 Member 0 Permalink

    Sounds like a conveyor belt to me. You can use PIPE the same way. After you have set the way you want PIPE to go, you just remove the brick layer on one side and you are set. 

  • optimus2006
    18th Jan 2018 Member 0 Permalink

    @randalserrano (View Post)

     But this thing can be made to switch directions as well by adding heat or cooling it down with HEAC. Pipe's can do that. NOTHING in the tpt today can do that.  So, I think tbis is a really well thought-out idea! Why is jacob1 missing ALL of the best ideas... :(

  • _Theo
    18th Jan 2018 Member 0 Permalink

    I tried to make a conveyor belt once but I only made 4 elements which went either up, down, left or right, this is way more interesting!