This was inspired by the fukoshima nuclear explosions to try to simulate them and see what could happen. v1.0
It is now fully functional AND completly destroyable only a few elements are not destroyable but it needs them to actually function.
The controls are as follow (a long list)
Cooling:this turns the cooling system on.
Generator 1:This turns on generator 1s turbine.
Generator 2:does exactly the same but on generator 2 on the right (warning slightly buggy).
Uranium still 1:heats up uranium still one.
Uranium still 2:heats up uranium still two.
Uranium still 1 cont:these are the continue mechanism's used when the generators are online this cruises temperature on still 1
Uranium still 2 cont:these are the continue mechanism's used when the generators are online this cruises temperature on still 2
Generator 1 out:allows power out of generator 1.
Generator 2 out:allows power out of generator 2.

Hopefully this has explained how the reactor is used.
This specific uranium reactor heats up its fuel in stage 1 where it puts pressure into the stills you cannot use the generators or cooling during this time.Stage 2 is running the still cont for 1 minute until it stabilizes temperature then you can turn on the generators and the generator outs the cont stills can stay online during this operation.

then when you have gotten bored and want to destroy it turn on the cooling turn every thing else off,until the core temp reader mesures that the tempriture is thirthy (this is only the avrage core temp read the core temp with cursor) and press the pscn and then the big M,you have been wandering does to put the plant into a realitstic meltdown.
enjoy!

it's reacted but you left the core stills on too long.
update 1.1

update it now has a stop button and background!!

update fully functioning with all buttons working need some ideas

NEW v7 go check it out new graphics and tonnes of new features like a over exploding dam and base along with a new cenario and emergency cooling supply!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (i like !!!!!!!S)
EDIT: To run it properly get the core to 300 by putting the still1 still2 geneartors 1,2 gen out 1,2 then the still1 cont still2 cont when its at 300 turn off still1 and still 2 make sure cooling is off leave still1 cont and still2 cont to meltdown normally put still1 still2 still cont 1 still cont 2 and all cooling off and to stop perminantly press stop it will put n2 into the reactor so it wont start up. XD enjoy.