The Powder Toy

Making Indestructible Armor.

  • BreakingNYC     18th Apr 2011 Member 0 Permalink
    i don't know if this should be put here. so...

    this is very good for making bunkers.

    First...A layer of Diamond.....then void. then make a 3x3 layer of insulator behind the void. next is metal and finally quartz. this type of armor was used on the Prism Tank. its only weakness is Pressure. tryed this with 3 nukes at the same time, then another 2 after i fired all the 3. still didnt get through. only pressure got through.


    oh and nearly forgot heat cant get beyond the insulator only the diamond and void will receive heat,
  • vanquish349     18th Apr 2011 Member 0 Permalink
    diamond is indestructeable so it will never be destroyed
  • Uberness     18th Apr 2011 Member 0 Permalink
    @BreakingNYC (View Post)
    Instead of DMND, use BCLN with ctype BRAY.
  • baldboy_666     18th Apr 2011 Member 0 Permalink
    All the layers of armor are neccesary because:
    1. Even if DMND is indestructible, pressure could still get inside it and intense pressure can kill a human/STKM ( It actually can't block pressure but try adding BHOL to counter the pressure outside)
    2. DMND is a good conductor of heat so nuke a bunker made of mainly DMND can result in some melted layers and it can reach up to 1000 degrees
  • vanquish349     18th Apr 2011 Member 0 Permalink
    @baldboy_666 (View Post)
    i am just saying it would be better if it didnt use indetructable elements
  • pegosh2     18th Apr 2011 Member 0 Permalink
    @vanquish349 (View Post)
    I agree, dmnd should be used for "armor."

    @baldboy
    Perhaps a lot of pump set to 0C would work better?
  • baldboy_666     18th Apr 2011 Member 0 Permalink
    @pegosh2
    Yeah, maybe pump can be better.
  • BreakingNYC     18th Apr 2011 Member 0 Permalink
    the diamond is just for stopping the BOMBS
  • that-random-dude     18th Apr 2011 Member 0 Permalink
    bomb powder, shield, and insl
You need to login before you can post replies