Difference between revisions of "Elements:Walls"

From The Powder Toy
Jump to: navigation, search
m (File:Energy_Wall.png Energy Wall)
(File:E-Hole.png E-Hole)
Line 181: Line 181:
 
'''Special:'''
 
'''Special:'''
 
Holds particles in place until electrified, releases them when electrified.
 
Holds particles in place until electrified, releases them when electrified.
Forms [[Elements:Special#Black Hole|Black Holes]] when too much mass is put into it.
+
Forms [[Elements:Special#Black Hole|Black Holes]] when too much mass is put into it. Each pixel of E-Hole can have up to 1500 parts in it before it forms Black Hole.
 
E-Hole will also remove jetpacks from a stickman or a fighter.
 
E-Hole will also remove jetpacks from a stickman or a fighter.
  

Revision as of 16:09, 10 August 2016

Language: English  • Deutsch • español • suomi • français • हिन्दी • 日本語 • 한국어 • polski • русский • svenska • 中文 • 中文(简体)‎

Walls

This category contains 17 elements, 15 of which are true walls, all of which are indestructible.

NOTE: some things like BRAY (when shot out from ARAY) can go through any wall. This is just because it doesn't check for walls when being created, it can't actually exist inside most walls. LIGH does the same.

Wall Erase.png Eraser

Description: "Erases walls."

Blocks: N/A

Allows: N/A

Special: N/A

Conductor Wall.png Conductive Wall

Description: "Blocks everything. Conductive."

Blocks: Everything

Allows: Nothing

Special: Conducts SPRK. Transparent to ARAY.


E-Wall.png E-wall

Description: "E-Wall. Becomes transparent when electricity is connected."

Blocks: Everything, unless powered

Allows: Nothing, unless powered

Special: Acts like WALL (Non conductive) when not electrified, otherwise acts like Conductor.

Detector.png Detector

Description: "Detector. Generates electricity when a particle is inside."

Blocks: Nothing

Allows: Everything

Special: Will pass SPRK on to anything conductive while a particle is in its area. When activated, it gives out a orange glow.

Streamline.png Streamline

Description: "Streamline. Set start point of a streamline."

Blocks: N/A

Allows: N/A

Special: Shows you how pressure is moving around the simulation. Unlike other walls, the brush size doesn't matter.


Fan.png Fan

Description: "Fan. Accelerates Air. Use the line tool to set direction and strength."

Blocks: Nothing

Allows: Everything

Special: Creates pressure and airflow. To use, place the wall where you need it, while you still have the Fan wall selected hold shift, click on the wall then drag in the direction you want air to flow.

Fan gives stickmen the ability to shoot out air, just like it would an element. Its head will turn light blue, and it will get overridden by any other element it touches.

Liquid Conductor Wall.png Liquid Permeable

Description: "Blocks most particles but lets liquids through. Conductive."

Blocks: Gases, Powders, Solids and Energy

Allows: Liquid Elements, Pressure

Special: Only allows liquids to pass through it, Also conducts SPRK to anything conductive.


Absorb Wall.png Absorbing wall

Description: "Absorbs particles but lets air currents through."

Blocks: Nothing, it eats them instead

Allows: Pressure

Special: Absorbs all particles that enter its space. HOWEVER, if the particle has a vector speed (X) and the thickness is less than X, the particles will pass.

Wall.png Wall

Description: "Basic wall, blocks everything."

Blocks: Everything

Allows: BRAY

Special N/A

Air Wall.png Non-permeable wall

Description: "Allows air, but blocks all particles."

Blocks: All particles of any state

Allows: Pressure

Special: N/A

Solid-Only Wall.png Powder-Permeable

Description: "Allows powders, blocks all other particles."

Blocks: Anything not a powder, except FIRE, SMKE and CO2

Allows: Powders, FIRE, SMKE, CO2

Special Allows only powders and FIRE, SMKE and CO2.

Allow Conductor Wall.png Conductor

Description: "Allows all particles to pass through and conducts electricity."

Blocks: Nothing

Allows: Everything

Special: Conducts SPRK to anything conductive.


E-Hole.png E-Hole

Description: "E-Hole. Absorbs particles, releases them when powered."

Allows: Nothing

Blocks: Nothing (Absorbs)

Special: Holds particles in place until electrified, releases them when electrified. Forms Black Holes when too much mass is put into it. Each pixel of E-Hole can have up to 1500 parts in it before it forms Black Hole. E-Hole will also remove jetpacks from a stickman or a fighter.

Gas Wall.png Gas permeable wall

Description: "Allows gasses, blocks all other particles."

Blocks: Liquids, Solids, Powders and Energy.

Allows: Gasses and Pressure

Special: This wall does allow FIRE as well.


Gravity Wall.png Gravity wall

Description: "Gravity wall. Newtonian Gravity has no effect inside a box drawn with this."

Blocks: Newtonian gravity.

Allows: All particles

Special: If you make a box using gravity wall, then Newtonian gravity has no effect inside the box. It does not block how things like pressure are blocked, it just sets the gravity of all things inside the box to 0.

When a stickman/fighter makes contact, small purple rocket boots appear (Or what other call jetpacks), giving that person the ability to fly by ejecting hot plasma downwards. A stickman can still use another element, but cannot walk or "jump" without creating plasma, making troublesome to walk across flammable materials. A stickman cannot be hurt by plasma when it has a jetpack on, but will still be hurt by heat.

Controls: ^ arrow key: up < arrow key: left > arrow key: right <> simultaneously held down: Brake (Slowly goes down)

Energy Wall.png Energy Wall

Description: "Allows energy particles, blocks all other particles."

Blocks: Everything except energy particles.

Allows: All energy particles. At the moment, these are PHOT, NEUT, ELEC, PROT, and GRVT

Special: Allows energy.

Airblock Wall.png Airblock Wall

Description: "Allows all particles, but blocks air."

Blocks: Pressure and velocity

Allows: All particles, any state

Special: N/A