The Powder Toy

Uniflow Steam Engine

  • cyberdragon     6th May 2013 Member 1 Permalink

    Edit: Ok. I cycles once, then the piston breaks cause it tries to cycle fast. 

    I also need a way to get the cylender hot. (Heat from the boilers)

    1151678View Save 1151678
  • cyberdragon     7th May 2013 Member 0 Permalink

    Bump, also the right poppet valve won't close. -_- 

  • coenmcj     7th May 2013 Member 0 Permalink

    Looks interesting, good luck with the Valve and the remainder of the boiler.

  • cyberdragon     7th May 2013 Member 0 Permalink

    O.K...Why are my wifis spontainiously changing channals? That's wierd. 

     

    EDIT: OK...Need to keep the cylender hot (realistic engine = realistic problems) But I can't get the heatswitch to the other side because of the pipes. (this is why powder toy needs layering)

You need to login before you can post replies